該頁無縮略圖
AS/RS Load Handling Devices Retrofit Services
MIAS International
MIAS GmbH
MIAS Hungary
MIAS USA
MIAS Inc., Materials Handling
14240 South Lakes Drive
Charlotte, NC 28273
info@mias-group.com
MIAS Hungary Kft.
Esze Tamás u. 23
3200 Gy?ngy?s
Hungary
info@mias-group.com
MIAS Maschinenbau,
Industrieanlagen & Service GmbH
Dieselstra?e 12 - 85386 Eching,
Germany
info@mias-group.com
MIAS China
MIAS Australia
MIAS Materials Handling (Kunshan)Co., LTD.
No.359,Hengguanjing Road,Zhangpu Town
Kunshan,Jiangsu 215321,P.R. of China
sales@mias-group.com.cn
MIAS Hungary Kft. MIAS Australia Pty.Ltd.,Sydney,Australia
Esze Tamás u. 23
3200 Gy?ngy?s
Hungary
info@mias-group.com
1947
1957
1965
1985
MIAS moves and connects. Our transport and load
handling devices can be used to move loads both
horizontally and vertically and can be turned on
every axis. Moving, lifting,lowering, storing and
retrieving loads of all kinds are in the MIAS DNA.
MIAS is a leading German manufacturer of warehouse equipment.
It offers design, engineering, and manufacturing of telescopic forks
and AS/RS systems.
Today, the MIAS Group employs more than 700 people. The company
is globally established, with its headquarters in Munich and
subsidiaries in China, Hungary, the United States, and Australia.
The annual output is approximately 15,000 units of various
telescopic forks and 300 units of stacker cranes.
What
Who
The origins of the company
go back to a traditional
locksmith’s – the family
business Büttner Stahl- und
Maschinenbau founded in 1947.
The company participated in the design and
construction of the first elevated automated
three-dimensional warehouse in Germany.
The client was Bayer Pharmaceutical, which
started the process of supporting automated
three-dimensional storage equipment.
The company developed into
a machinery manufacturing
company.
Converting the company name
to MIAS with shifting the focus
to warehouse equipment
such as stacker cranes and
telescopic forks.
2009
2020
2022
To provide faster and better service to its Asian customers,
MIAS Materials Handling (Kunshan) Co., Ltd.
was established in 2009 in Kunshan. The company began
applying German standards to local production, marking
an important step for the MIAS Group in expanding and
developing the Asian market.
Where
2025
To provide faster and
better service to its Asian
customers, MIAS Materials
Handling (Kunshan) Co., Ltd.
was established in 2009 in
Kunshan. The company began
applying German standards
to local production, marking
an important step for the
MIAS Group in expanding and
developing the Asian market.
The 40-meter ultra-high stacker crane project (Vietnam)
and the 20/30 tons heavy duty stacker cranes were all
in operation which set up ultra-high and heavy duty
industry benchmarking case.
Certified to ISO 9001 and ISO
14000 standards.
MIAS (Kunshan) moved to the
new factory and embarked on a
future of rapid development. 現行證書日期： 2020年 1月 19日 首次頒發日期:
證書有效期限： 2023年 1月 18日 ISO 14001 - 2020年 1月 19日
證書識別編碼： 10245236 ISO 9001 - 2020年 1月 19日
認證證書
王崧
大中華區總經理
頒證機構： 勞氏質量認證（上海）有限公司
代表: 勞氏質量認證有限公司
本證書信息最遲可于證書發放之日起30個工作日后在國家認證認可監督管理委員會官方網站(www.cnca.gov.cn)上查詢。獲證組織必須定期接受監督審核并經審核合格此證書方繼
續有效。
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents
are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss,
damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's
Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Issued by: Lloyd's Register Quality Assurance (Shanghai) Co., Ltd., Room 2018, Ocean Tower, No. 550 Yan An Dong Road, Shanghai, 200001 for and on behalf of: Lloyd's
Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 1
茲此證明下列公司之管理體系：
米亞斯物流設備（昆山）有限公司
中國, 江蘇省昆山市張浦鎮建德路399號
統一社會信用代碼: 913205836979337315
注冊地址： 江蘇省昆山市張浦鎮建德路399號
通過勞氏公司之認證，符合下列管理體系標準：
ISO 14001:2015, ISO 9001:2015
GB/T 24001-2016, GB/T 19001-2016
證書編號： ISO 14001 – 00023823, ISO 9001 – 00023824
該管理體系適用于：
伸縮叉、堆垛機的設計及制造
Current issue date: 19 January 2020 Original approval(s):
Expiry date: 18 January 2023 ISO 14001 - 19 January 2020
Certificate identity number: 10245235 ISO 9001 - 19 January 2020
Certificate of Approval
Rhett Wang
Area Operations Manager, Greater China
Issued by: Lloyd's Register Quality Assurance (Shanghai) Co., Ltd.
for and on behalf of: Lloyd's Register Quality Assurance Limited
The certificate can be checked for validity on CNCA website (www.cnca.gov.cn) 30 working days after the date of issuance. This approval is subject to surveillance assessment
carried out in accordance with the LRQA assessment and certification procedures.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents
are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss,
damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's
Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Issued by: Lloyd's Register Quality Assurance (Shanghai) Co., Ltd., Room 2018, Ocean Tower, No. 550 Yan An Dong Road, Shanghai, 200001 for and on behalf of: Lloyd's
Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 1
This is to certify that the Management System of:
MIAS Materials Handling (Kunshan)
Co., Ltd.
No.399 Jiande Road GIP II , Zhangpu, Kunshan City, Jiangsu Province 215321, China
Unified Social Credit Code: 913205836979337315
has been approved by Lloyd's Register to the following standards:
ISO 14001:2015, ISO 9001:2015
GB/T 24001-2016, GB/T 19001-2016
Approval number(s): ISO 14001 – 00023823, ISO 9001 – 00023824
The scope of this approval is applicable to:
Design and Manufacturing of Telescopic Fork and Stacker Crane
6
Telescopic Forks
Whatever you have to move,
whichever are the unique requirements of your sector:
MIAS will find the best technical solution for you.
Put your trust in the many years of experience in all
transportation-related issues that MIAS has to offer.
Telescopic Fork for
Miniload 7
Viper 9
Pallets 10
Car Body 14
Special applications 15
Heavy Duty 20
Telescopic Forks
Precision and quality...
Inspired and Innovative
The MIAS Miniload telescopic fork is the ideal load
handling device for the single-deep storage of totes of
the same size in single-space or multi-space shelves.
The optimized overall size enables a low shelf width and
a very small distance between the shelves.
Single-deep Miniload Telescopic Fork (Dingo)
High availability
High availability
-30℃ ~120℃（Working temperature）
-30℃ ~120℃（Working temperature）
Compact, weight-optimized design
Compact, weight-optimized design
Extending cross
section (w*h) mm 175x36 184x50 95x60
Face width mm 175-800 180-800 95
Overall length mm 550-1,300 650-1,300
Installation height mm 100 120 135
Extension (max.) mm 650-1,500 750-1,580
Aisle width mm 750-1,500 850-1,500
Payload (max.) -1 tine kg ≤ 100 ≤ 250
Acceleration unloaded m/s2 ≤ 5 ≤ 5
Speed unloaded m/s ≤ 1 ≤ 1.5
It is a ideal solution for new energy batteries and other
special products, the optimal size of the exterior makes
your space layout more compact and efficient.
Single-deep Miniload Telescopic Fork (Dingo)
Extending cross
section (w*h) mm 130x40 140x40 140x50
Face width mm 130 140 140
Overall length mm 550-1,300
Installation height mm 100
Extension (max.) mm 650-1,500
Aisle width mm 750-1,500
Payload (max.) -1 tine kg 100
Acceleration unloaded m/s2 5
Speed unloaded m/s 1
8
Telescopic Fork with Belt Conveyor
The telescopic forks with lateral belt conveyor can be
used to place in storage and retrieve containers and
cartons up to a maximum weight of 100 kg, up to five
levels deep, in shelf compartments.
Our positive-locking drive concept enables high dynamic
values to be achieved. Thanks to the alignment and
centering of the load via flaps on the load handling
equipment, the exact positioning of the load can be
ensured.
Type mm 175x36 184x50
Extending cross
section (w*h) mm 1,250 1,600
Aisle width mm 1,350 1,800
Extension (max.) mm 1,400 1,700
Storing depth Up to 5-deep
Payload (max.) -1tine kg 100 360
Acceleration unloaded m/s2 5
Speed unloaded m/s 2
Low overall height and, therefore,
optimum use of the storage volume
Optimum mechanical design and
Lightweight design
Flexible: can be combined with variety
of forms of drive
-30℃ ~120℃（Working temperature）
Telescopic Forks
Double-deep Miniload Telescopic Fork(Fox)
High availability
Optimum storage capacity due to
narrow aisles and double-deep storage
-30℃ ~120℃（Working temperature）
Compact, weight-optimized design
The double-deep MIAS Miniload telescopic fork is
particularly well suited to double-deep storage of
containers in small components warehouses with narrow
aisle clearance.
Due to the low cross-section height, a minimum distance
between the containers in the shelves, and therefore a
maximum number of containers in the warehouse, is
achieved.
Extending cross
section (w*h) mm 210x36x75 210x36x88 180x55x130
Face width mm 210-600
Overall length mm 600-1,000
Installation height mm 150
Extension (max.) mm 1,500-2,100
Aisle width mm 700-1,100
Payload (max.) -1 tine kg 50 100 300
Acceleration
unloaded m/s2 5
Speed unloaded m/s 1
Inspired and Innovative
Single-deep Carton Gripper VIPER
Cartons pose particular challenges when it comes to
automatic load handling: from highly diverse conditions
and sizes to practically undefinable tolerances. But here
too, MIAS has a solution!
With the Viper series you have a firm grip on every
type of carton. Thanks to the individually configurable
number of gripper fingers, up to four loads can be stored
one behind the other in a single storage compartment.
Integrated finger assembly, brushless
motor,built-in magnetic encoder,
closed-loop control multiple protection
RS485Modbus、RS485CANbus，
standard PLC drive block, easy to integrate
Optimized mechanical design,no drag
chain, compact structure
Wide range of application,
suitable for the miniload and shuttle
Viper S
Fixed distence
Viper F
Adjustable distance
Extending cross
section (w*h) mm 50x192
Storage 1~4
Box/carton size mm Length：1,200 （max）
Width：800（max）
Payload kg 100（25*4/50*2）
Speed m/s 1.5（Unload）/ 0.75（Load）
Acceleration m/s2 2（Unload）/ 1（Load）
Extension mm 0~1,680
Motor / servo motor
Double-deep Carton Gripper VIPER
Cartons pose particular challenges when it comes to
automatic load handling: from highly diverse conditions
and sizes to practically undefinable tolerances. But here
too, MIAS has a solution!
With the Viper series you have a firm grip on every type of
carton. Thanks to the individually configurable number of
gripper fingers, up to four loads can be stored one behind
the other in a single storage compartment.
Integrated finger assembly, brushless
motor,built-in magnetic encoder,
closed-loop control multiple protection
RS485Modbus, easy to integrate
Optimized mechanical design, compact
structure
Wide range of application,
suitable for the miniload and shuttle
Viper DS
Fixed distence
Viper DF
Adjustable distance
Extending cross
section (w*h) mm 75x202
Storage 1~4
Box/carton size mm Length：1,200 （max）
Width：800（max）
Payload kg 100（25*4/50*2）
Speed m/s 1.5（Unload）/ 0.75（Load）
Acceleration m/s2 2（Unload）/ 1（Load）
Extension mm 0~2,520
Motor / servo motor
10
Telescopic Forks
Single-deep Pallet Telescopic Fork (Dingo)
The classic choice when it comes to telescopic forks:
this telescopic fork was invented by us in the 60s, and
since that time it has undergone continuous further
development. Robust, flexible, low-maintenance – one
of our top sellers, and with good reason!
Operation: MIAS pallet telescopic forks are an excellent
choice for storing or moving pallets or skeleton
containers with a maximum loading weight of 1,500 kg
single-deep.
Type Type 1 Type 2 Type 3
Extending cross
section (w*h) mm 170x60 170x65 170x70
Face width from mm 540
Overall length mm 1,200/1,250/1,300/1,350/1,400/1,450/1,500
Installation height mm 125 125 130
Extension (max.) mm 1,650-1,975
Aisle width mm 1,400 / 2,000
Payload (max.) -
2 tines kg 1,000 1,250 1,500
Acceleration
unloaded m/s2 3
Speed unloaded m/s 2
Tried and tested over a thousand times
Optimal static and dynamic load-bearing
capacity
Low level of bowing under load
-30℃ ~120℃（Working temperature）
Pallet Telescopic Fork Standard (Dingo & Lion)
We have standardized the most common pallet
telescopic fork and models and can offer these with a
short delivery time at particularly attractive terms.
These types covers more than 90% of all
application scenarios for pallets
Fast delivery
Best price-performance ratio
Single-deep PTS Pick-Up PTP
Extending cross
section (w*h) mm 170x65 170x65x170
Standard overall
length mm 1,200/1,300 1,300
Installation height mm 151.5 280
Extension mm Optional (specific size)
Tine distance mm 1,350-2,500
Payload (max.) -
2 tines kg ≤ 1,250 ≤ 1,250
Color RAL9005 RAL9005 -30℃ ~120℃（Working temperature）
Inspired and Innovative
Double-deep Pallet Telescopic Fork (Fox)
At the end of the 70s, the double-deep pallet telescopic
fork followed the single-deep version, bringing enormous
cost savings.
The range has been extended to include the single-tine,
double-deep pallet telescopic table. The version with
a wide plate upper part is specially designed for closed
pallets such as Chep pallets that do not have any free
space for fork tines.
Type Type 1 Type 2 Type 3
Extending cross
section (w*h) mm 180x65x160 180x70x165 180x80x175
Face width from mm 540
Overall length mm 1,200/1,250/1,300/1,350/1,400/1,450/1,500
Installation
height mm 250 250 280
Extension(max.) mm 2,720-3,285
Aisle width mm 1,500-1,800
Payload (max.)
-2 tines kg 1,000 1,250 1,500
Acceleration
unloaded m/s2 3
Speed
unloaded m/s 2
Tried and tested over a thousand times
Optimum mechanical design and
Lightweight design
Low level of bowing under load
-30℃ ~120℃（Working temperature）
Double-deep Pallet Telescopic Fork Pick-Up (Lion)
The original: our bestselling pallet telescopic fork is the
combined PickUp telescopic fork. This innovative model,
in use since the mid 90s, has been increasingly replacing
the classic double-deep telescopic fork in the European
pallet handling sector.
Optimal static and dynamic loadbearing capacity
Low level of bowing under load
Low level of maintenance due
to positive-locking, double-row
stationary gear
-30℃ ~120℃（Working temperature）
Pallet Telescopic Fork Standard (Dingo & Lion)
Type 1 Type 2 Type 3 Type 4 Type 5 Type 6
Extending cross
section (w*h) mm 170x60x135 170x65x170 170x70x173 180x80x178 220x90x200 250x100x220
Face width from mm 540 620
Overall length mm 1,300/1,350/1,400/1,450/1,500/1550/1,600/1,650/1,700
Installation height mm 278 280 283 289 330 361
Aisle width mm 1,500-1,800 1,600-1,900
Extension (max.) mm 2,850-3,180 2,600-3,480
Payload (max.) -
2 tines kg 500 1,250 1,500 1,600 2,500 3,000
Own weight (min.) kg 757 776 795 1,100 1,300 1,550
Acceleration
unloaded m/s2 3
Speed unloaded m/s 2
12
Telescopic Forks
Pallet Telescopic Fork with Eccentric-Stroke
This telescopic fork is used when goods have to be
moved, hoisted or lifted onto a distribution vehicle for
transport, while remaining in a stationary position.
Type Type 1 Type 2 Type 3
Extending cross
section (w*h) mm 170x60 170x65 170x70
Number of tines Variable
Standard overall
length mm 1,200/1,250/1,300/1,350/1,400/1,450/1,500
Installation
height (min.) mm Design base-plate： 420
Design base-frame：610 (adjustable heights )
Stroke height mm 50-450
Payload (max.) -
2 tines kg 1,000 1,250 1,500
Acceleration
unloaded m/s2 3
Speed unloaded m/s 2
Time for
eccentric stroke s 2
Type Single-deep Double-deep Pickup
Extending cross
section (w*h) mm 170x65
170x70
180x65x160
180x70x165
170x65x170
170x70x173
Eccentric hoist mm Variable 50 up to 110
Standard overall
length mm 1,300 / 1,350 / 1,400 / 1,450 / 1,500
Extension (max.) mm 1,975 3,285 3,180
Payload (max.) -
2 tines kg 1,250 (170x65)
1,500 (170x70) 1,250 1,250
Acceleration
unloaded m/s2 3
Speed unloaded m/s 2
Adjustable to suit your mounting interface
Modular design and low maintenance cost
Modular design
Telescopic platforms and eccentric
displacement drives can be provided if required
-30℃ ~120℃（Working temperature）
-30℃ ~120℃（Working temperature）
Pallet Telescopic Fork with Chain Conveyor
Can be used in distribution centers with order picking
areas to move pallets onto chain conveyors.Through the
fork and the transport chain, can also be selected for
many depth of goods operation.
Simple assembly
Inspired and Innovative
In distribution centers with order-picking zones, pallets
often need to be transferred on tilted gravity conveyors.
Combined telescopic forks with inclination device from
MIAS have been specially developed for these applications
and adapted to satisfy ever more demanding requirements.
Modular design
Low maintenance cost
-30℃ ~120℃（Working temperature）
Type Single-deep Double-deep Pickup
Extending cross
section (w*h) mm 170x65
170x70
180x65x160
180x70x165
170x65x160
170x70x173
Tilting angle +/- 2,3° (4%)
Standard overall
length mm 1,300 / 1,350 / 1,400 / 1,450 / 1,500
Extension (max.) mm 1,975 3,285 3,180
Payload (max.) -
2 tines kg 1,250
Acceleration
unloaded m/s2 3
Speed unloaded m/s 2
Adjustable range Up to 1,500 mm
Hoist version Single beam/double beam
Adjustable to suit your mounting interface
Pallet Telescopic Fork with Inclination Device
Pallet Telescopic Fork with (a)symmetrical
Tine Adjustment
Telescopic forks with optional tine adjustment are the
perfect solution whenever：
1.the load is so large that it can no longer be handled by
normal load carriers,
2.you are using several different load carriers,
3.the load carrier also needs to be moved sideways.
Can be combined with any type of drive
14
Telescopic Forks
Low overall heights
Car Body Telescopic Fork
Hardly any other branch of industry uses the telescopic
fork for as many things as the automotive industry. In the
production process, in particular, our telescopic forks
are used wherever vehicle chassis and bodies are stored,
transferred to the next production step or assembled.
Type Type 1 Type 2 Type 3
Extending cross
section (w*h) mm 180x80 180x100 200x100
Face width Variable
Standard overall
length mm 1,800/2,000/2,200/2,400
Installation
height (from) mm 140 180 210
Mounting area mm 1,850-3,600
Extension (max.) Variable
Payload (max.) -
2 tines kg 800 1,000 1,200
Acceleration
unloaded m/s2 1.5
Speed unloaded m/s 1.5
Type Type 1 Type 2
Extending cross
section (w*h) mm 200x100 240x120
Number of tines 2 / 3
Standard overall
length mm > 1,500
Installation height mm 490
The maximum stroke for
eccentric hoists mm 300
Extension (max.) Variable
Payload (max.) - 2 tines kg 1,250 1,500
Acceleration unloaded m/s2 2
Speed unloaded m/s 1
Time for eccentric stroke s 2
Eccentric-stroke Telescopic Fork for Car Bodies
In automotive production, chassis and vehicle bodies
always have to be transferred from one production line
to the next as they move through the various production
steps.
Here, reliable and precise handling of the components is
absolutely essential – and this is a particular strength of
the MIAS eccentric-stroke telescopic fork.
Exact component positioning thanks to
positive-locking drive concept for telescopic
fork and dynamic approach buffer used
where required
Optional stand-by drives
Already in use by many famous automotive
manufacturers
Operational reliability: more than 99%
availability
Optimum positioning reliability thanks to
combined drive concept gear– chain
Low level of fork bowing under load
Inspired and Innovative
Telescopic Forks for Industrial Trucks
Alongside rail-mounted stacker cranes, industrial trucks
play a key role in intralogistics goods transport. With our
attachments with and without additional lift, we offer the
optimum solution for every vehicle type and the version
with integrated additional capability is available for all
order-picking devices.
Extending cross section
(w*h) mm 170x65
Standard overall length mm 1,200 / 1,300 / 1,400
Lowest fork setting mm Standard frame: 350 mm
flat frame:180 mm
Tine distance/support width mm 370/540
Extension
(overall length 1.200 mm) mm 1,650
Payload (max.) - 2 tines kg 1,250
Acceleration unloaded m/s2 1
Speed unloaded m/s 1
Dimensions mm 930x1,160x170
Lift time s 2
Lift height mm 50
Designed cycle s 25
（Standard cycle for 30 ft channel length）
Recharging time s 11
Payload (max.) kg 1,200
Storage Up to 10-deep
Running wheels 8
Acceleration
unloaded m/s2 3
Speed unloaded m/s 1.7
Optimized mechanical design, tailored to
the relevant manufacturer and vehicle types
Option of attachments for laser detection
and sensory analysis
Can be used in cold storage areas down to
-30° C
Versions with tine adjustment available as
an option
Flexible: Configure your individual shuttle
Communication via Bluetooth
Ideal in combination with MIAS stacker
cranes
Shuttle
The shuttle efficiently stores palletized goods and
products in consolidated channel storage systems. The
shuttle is specially configured for your application.
Modular system for the individual selection of
components such as sensors, electronics and controllers.
Throughput through dynamics: extreme
speed and acceleration
Applicable in existing storage systems due
to the low overall height
Eccentric-stroke Telescopic Fork for Car Bodies
16
Telescopic Forks
Single-deep Narrow Section
Telescopic Fork（Dingo）
Specially designed to pass through those narrow aisles,
the telescopic boom is only a few millimeters wide,
which can greatly reduce the width between the required
shelves. This fork is the best solution when other forks
are not applicable.Excellent performance, widely used
in papermaking, steel and other industries in special
specifications of products.
Type Type 1 Type 2
Extending cross
section (w*h) mm 70x155 80x220
Face width mm Variable
Standard overall
length mm 1,000-2,000 1,300-3,000
Installation
height mm 260 280
Extension mm Variable
Aisles width mm 1,200-2,200 1,500-3,200
Payload kg Recommend:500-2,000
Variable
Recommend:800-2,500
Variable
Acceleration
unloaded m/s2 1.5
Speed unloaded m/s 1.5
Excellent solution in narrow aisles space
Low level of bowing under load
High availability
PUSH & PULL SYSTEMS
The PUSH & PULL SYSTEMS is designed for dense storage
of boxes. Moving without lifting so the boxes need to be
stacked at a very low height. The innovative push and
pull design allows for tighter space between the boxes,
resulting in more stacked boxes and ensuring heavier
loads than normal clamping and belt conveyor solutions.
Slide pulling or pushing trays, cases, or boxes and loads
up to 500 kg.
Dense storage to minimize the height of
the storeys
Modular design, easy maintenance and
replacement
Innovative design for heavier load bins
Reliable performance and long service life
Extending cross
section (w*h)
Variable
Face width mm
Standard overall
length mm
Installation
height mm
Extension mm
Aisles width mm
Payload kg 500（MAX）
Acceleration
unloaded m/s2 1
Speed unloaded m/s 1
Inspired and Innovative
Single-deep Narrow Section
Telescopic Fork（Dingo） Coil Telescopic Fork-Inner Bore（Dingo）
The maximum load is 5,000kg for forking coils with
central holes.Rotation speed can reach 30° /s, and the
expansion speed can reach 1 m/s. You can easily access
the goods from the coil while using the fork.
Extending cross
section (w*h)
Fork the outer coil
（The angle of fork inclination ≥ 120°）
Face width mm Variable
Standard overall
length mm 1,300-3,150
Installation
height mm Variable
Extension mm Variable
Payload kg 300-3,500
Acceleration
unloaded m/s2 1.5
Speed unloaded m/s 1.5
Extending cross
section (w*h)
Fork the inner bore coil
（With rotating chassis）
Face width mm
Variable
Standard overall
length mm
Installation
height mm
Extension mm
Aisles width mm
Payload kg 300-5,000
Acceleration unloaded Rotation 30° /s2；Extension 1 m/s2
Speed unloaded Rotation 30° /s；Extension 1 m/s
Coil Telescopic Fork-Excircle（Dingo & Fox）
Through \"V\" shape design, heavy steel coil, paper coil
and other coils can be firmly held up, used in the area of
paper making, steel and other coiled products.
Suitable for the coiled products
Suitable for the coiled products
Low level of bowing under load
Low level of bowing under load
High availability
Customized design
Customized design
High availability
Free rotation（0~180°）
18
Battery-powered Fork Anti-collision Switch
(TouchStop)
This anti-collision device is used to make an emergency stop
after the fork collides, and can effectively prevent the fall of
goods such as pallets, as well as the deformation and damage
of the shelf or the fork body.It adopts wireless transmission,
with a maximum distance of up to 20 meters, and with the
additional external omnidirectional antenna, the transmission
distance can reach 50m.
This functional device is divided into two parts: the transmitter
and the receiver.
The transmitter is installed on the side of the fork to detect
whether the fork collides and send the signal to the receiver
after the collision.
After receiving the collision signal, the receiver transmits the
collision signal to the PLC through high/low level (24V/0V)
signals, and the PLC controls the fork to stop quickly.
This set of devices has an intelligent battery power warning
function, which is convenient for users to replace the battery in
a timely manner.
It can be sensed with a small triggering
force ≤ 20N
Stable signal transmission with reliability
>99% (After more than 10,000 tests，
the signal has not been interrupted.)
Wide environmental adaptability covering
extreme temperatures and harsh
conditions in automated warehouses
Millisecond-level response
The delay time triggered by wireless signal
collision is only about 30ms,
then the fork is quickly stopped.
MIAS Circuit Board
The design of its core program code was
jointly developed in collaboration with
the State Key Laboratory of Structural
Analysis for Industrial Equipment, Xi'an
Jiaotong University.
Product Assembly Diagram
Product renderings
Power Supply Mode Battery
Service Life 12 Months
Telescopic Forks
Inspired and Innovative
Telescopic forks suitable for low-temperature
environment
Telescopic forks suitable for high-temperature
environment
Telescopic forks suitable for clean environment
Telescopic forks used in freezers require low-temperature
resistance, and corresponding requirements are
imposed on fork materials, motors, encoders, lubricating
grease, and assembly clearances. MIAS has nearly 1,000
applications of telescopic forks in low-temperature
automated stereoscopic warehouses, all of which
operate extremely stably.
There are generally two types of high-temperature
environments for telescopic forks. One is that
the telescopic fork itself is in a high-temperature
environment, such as aging workshops in the new
energy industry, painting workshops in home appliance
and automobile industries, etc., where the temperature
is usually below 100° C. In such cases, electrical
components, lubricating grease, and mechanical
assembly all require special treatment.
The other is that the goods carried by the telescopic
forks are high-temperature, such as those from metal
smelting furnaces and vacuum furnaces. In such working
conditions, the temperature of the goods is 150° C-200° C
in low cases and over 800° C in high cases, while the
environment where the telescopic fork itself is located
is at room temperature. This requires proper heat
insulation treatment to prevent heat conduction, and the
assembly of the telescopic fork also needs appropriate
handling.
In the chip and semiconductor industries, telescopic
forks are also used in automated stereoscopic
warehouses and internal handling. Telescopic forks used
in such environments generally require clean treatment.
MIAS has practical cases of clean-type telescopic forks
applied in the semiconductor field, and we can provide
series of telescopic forks with class 100 cleanliness level.
20
Telescopic Forks
Type Type 1 Type 2 Type 3 Type 4 Type 5
Extending cross
section (w*h) mm 210x100 240x120 280x145 290x160 360x220
Number of
tines Variable
Standard
overall length mm 1,500/2,000/2,500
Installation
height from mm 190 240 240 250 265
Extension(max.) Variable
Payload(max.) -
2 tines kg Variable
Acceleration
unloaded m/s2 1.5
Speed unloaded m/s 1.5
Single-deep Heavy-duty Telescopic Fork
A Mias solution for loading goods ranging from several
tons to tens of tons. Mias telescopic forks are widely
used in many industries, from steel plates in the
machinery industry to gearboxes in wind turbines.
With a large number of multi-fork projects verified, the
product can be expanded to more than 10 forks to cope
with load access of large size and heavy cargo.Combined
with electromagnetic clutch and brake configuration, the
position and number of forks can be flexibly selected.
Low level of bowing under load
Advance gear/feed gear mechanism with
special covering for applications with a
high level of pollution
High availability
Single-deep Narrow Section Heavy-duty
Telescopic Fork （Dingo）
This product is mainly designed for heavy-duty narrow
space and is mainly used to deal with special structural
products in papermaking, textile, steel, printing and other
industries.It has the advantages of Low level of bowing,
safety and reliability.
Extending cross
section (w*h) mm 120x345
Face width mm 75-120
Standard overall
length mm 1,300-3,000
Installation
height mm 530
Extension mm Variable
Aisles width mm 1,500-3,500
Payload kg Recommend:1,200-6,000
Variable
Acceleration
unloaded m/s2 1.5
Speed unloaded m/s 1.5
Excellent solution in narrow aisles space
Low level of bowing under load
High availability
Inspired and Innovative
Single-deep Heavy-duty Telescopic Fork
Single-deep Narrow Section Heavy-duty
Telescopic Fork （Dingo）
Type Type 1 Type 2 Type 3
Extending cross
section (w*h) mm 205x100x220 240x110x220 260x120x240
Number of
tines Variable
Standard
overall length Variable
Installation
height from mm 320 335 350
Extension (max.) Variable
Payload (max.) kg Variable
Acceleration
unloaded m/s2 1.5
Speed
unloaded m/s 1.5
Optimal static and dynamic load-bearing
capacity
Enhanced gear drive,high availability
Double-deep Heavy-duty Telescopic Fork
The double-deep storage of loads is a special challenge
for design, load-bearing capacity and operational
reliability. Double-deep, heavy-duty telescopic forks
from MIAS tackle this challenge head on and have been
demonstrating their stability all over the world for many
years now.
Optimum positioning reliability thanks to
combined drive concept gear – chain
Super Heavy-duty Telescopic Fork
The MIAS Super heavy-duty telescopic fork is the king
among high rise storage facilities. It transports loads
weighing 50 tons or more with ease, on just ONE
tine. Thanks to its robust design, it is extremely low
maintenance and reliable.
Operation: Perfect for high rise storage facilities in the
steel industry.
Optimal static and dynamic load-bearing
capacity
Up to 50 tons of working load per tine
Low maintenance due to positive-locking,
double-row stationary gear
Can be used in high ambient temperatures
Type Type 1 Type 2 Type 3 Type 4 Type 5
Extending cross
section (w*h) mm 500x290 500x350 600x400 500x600 620x750
Number of tines Variable
Standard
overall length mm 1,500-3,500
Installation
height from mm 450 550 600 900 1,000
Extension(max.) Variable
Payload(max.) -
1 tines kg 16,000 24,000 28,000 36,000 50,000
Acceleration
unloaded m/s2 1.0
Speed unloaded m/s 1.0
22
Agfa
Audi
Bayer
BMW
Cargill
Coca Cola
Coop
CVS
Daimler Benz
DANA
Edna
Edeka
Egemin
Egger
Eisenmann
Excel Beef
Ford
General Motors
Heineken
Hydro Aluminium
Hyundai-Kia
IKEA
Jaguar
Jeld-Wen
Jungheinrich
Kaindl
Komatsu
Krones
Levis Turkey
LTW
Mercadona
Migros
Nekos Oy
Opel
Porsche
Prowell
Publix
Reijjk Zwaan
Sainsbury
Siemag
Siemens
Siempelkamp
SSI-Sch?fer
Noell
Swisslog
TGW
Viastore
Volvo
VW
Walgreens
Walmart
... ...
China
International
Customers
ABB
AFT
Audi
AVIC
BAOSTEEL
BMHRI
BMW
BYD
CATL
Chery
CHR
CIMC
CSG
CST Tire
Daifuku
Dematic
Dürr
Enotek
Ford
Formosa
Fortucky
Gaoke
GenSong
GITI Tire
HUASHINE INTELLIGENT
Honglo
Inform
JD
KIA
KSEC
KUKA
LEAD
Li Auto
Mingtai AL
Mirle
Muratec
NKC
Nova
Nti
OMH
PETEVIO
RIAMB
ROBO TECH
SAIC
SAILUN
SANY
Scivic
SGM
SIASUN
Suteng
Swisslog
TCL CSOT
Tesla
Volvo
V-Strong
VW Group
Wuxi Miracle
Zhongding
ZPMC
ZMI
... ...
Inspired and Innovative
Top Fork Length
Extension
Fork Distance
Telescopic fork inquiry demand data
Projects Units Introductions
Fork Length
（Cargo Size） mm
Extension mm
Fork Distance mm
Payload kg
Electrical configuration
Requirements
Working Condition
Please provide us with the following necessary datas and we will provide you with the appropriate technical solution.
Please take photos or scan the following data and send it to our email: sales@mias-group.com.cn. We will provide
professional services for you.
24
Stacker cranes
Stacker cranes are the heart of high rise storage facilities.
Efficient and reliable transport of your loads is fundamental for
your success. This is where MIAS joins the game: We would be
happy to configure a stacker crane to meet your requirements.
From completely new concepts to integration into existing
equipment, MIAS finds the optimum solution for you.
Stacker Cranes
Safety, Utilization , Efficiency...
AS/RS
Miniload - AKL
Ultra High Single Mast
Heavy Duty
Double Mast For Large
ETV \\ TV
Lifter
Stacker Cranes for Cleanroom
4-Wheel Stacker Crane Without Top Guiding
25
28
29
30
32
33
34
35
Stacker Cranes - AS/RS
Safety, Utilization , Efficiency...
High Speed Miniload Stacker Crane—AKL 10
Types AKL10
Heights m ≤18
Payload (max) kg 100
Travel acceleration
(max) m/s2 5.3
Travel speed (max) m/min 360
Lift acceleration (max) m/s2 4.0
Lift speed (max) m/min 180
As the core of your automated small parts warehouse,
the brand-new range of AKL miniload cranes, with its top
performance results, will guarantee fast, smooth and
futureproof storage of your containers. As usual, the AKL
series can be combined with our various load handling
attachments for small parts.
Faster storage and retrieval: Travel acceleration (max.)
5.3m/s2,with travelling speeds of up to 360 m/min and
lifting speeds of up to 180 m/min, the AKL series fulfils top
dynamic requirements.
Make optimum use of your available space: low approach
dimensions, both above/below as well as front/back.
Reduces operation costs: the common parts principle within
the product range reduces operational costs – optional
SuperCaps reduce energy consumption by at least 25%.
Typical projects:
Client Location Height(m) Payload(kg) (m/min)
Addverb India 11 50 360
Shanghai GM China Yantai 5 50 240
Shanghai GM China Shanghai 7 50 240
GETECH China Guangzhou 15 40 330
BOSCH China Changzhou 13.6 50 330
Inspired and Innovative
26
Stacker cranes AS/RS
Its innovative,
lightweight mast
design achieves
maximum weight
reduction, saving
energy and costs.
LIGHTWEIGHT DESIGN
MAXIMUM EFFICIENCY
MINIMAL APPROACH DISTANCES
OPTIMIZED USE OF SPACE
The storage of
braking energy
in the optional
SuperCaps
enables energy
consumption and
energy supply costs
to be reduced.
The floor crossbeam
slides into the track
rail. This reduces
the lower approach
dimensions to
a minimum and
increases the usable
storage space.
Optimum use of
storage space: the
Omega drive unit
is integrated in the
foot of the mast
and reduces the
approach dimensions
at the front/back to a
minimum.
26
Inspired and Innovative
High Speed Miniload Stacker Crane—AKL 20
Types AKL20 AKL 22(Double Mast )
Heights m ≤ 24 ≤ 20
Payload (max) kg 300 300
Travel acceleration
(max) m/s2 3.5 1.5
Travel speed
(max) m/min 300 270
Lift acceleration
(max) m/s2 2.0 1.5
Lift speed (max) m/min 120 100
As the core of your automated small parts warehouse,
the brand-new range of AKL miniload cranes, with its top
performance results, will guarantee fast, smooth and
futureproof storage of your containers. As usual, the AKL
series can be combined with our various load handling
attachments for small parts.
Make optimum use of your available space: low approach
dimensions, both above/below as well as front/back.
Reduces operation costs: the common parts principle within
the product range reduces operational costs – optional
SuperCaps reduce energy consumption by at least 25%.
Typical projects:
Client Location Height(m) Payload(kg) (m/min)
Danfoss China Haiyan 4.25 100 240
Guizhou TYRE Vietnam 19 70*2(Dual-Station) 120
SCC Thailand 18.6 50 240
28
Stacker cranes AS/RS
Client Location Height(m) Payload(kg) (m/min)
Agristo Belgium 44.6 1,400 150
Agristo Tiburg Holland 44.7 1,400 150
SABS China Shanghai 20.55 1,000 210
Temic China Shanghai 22.6 800 160
GVO China Guangzhou 20 1,500 210
TCL CSOT China Huizhou 32.5 1,500 200
Ming Peng China Suzhou 27 1,000 180
HYOSUNG Vietnam 40 640 120
ESTēE LAUDER China Shanghai 34 600 210
GUIZHOU TYRE Vietnam 41 750 220
Ultra-High Stacker Crane—RBG
THE REQUIREMENTS DEFINE THE TECHNOLOGY.
MIAS has led the field for decades and is a constant in
the industry. There are scarcely any pallet applications
that have not been moved by MIAS stacker cranes. Our
load handling attachments from our own production
lines achieve perfect harmony in combination with our
fully in-house produced stacker cranes.
Having access to this one-stop shop gives you a massive
advantage in expertise.
Whether you need single-mast devices with two load
handling attachments for double-deep loading or with
gear drive, triple-deep storage using telescopic forks or
multiple-depth storage with a shuttle - MIAS is the right
partner for your project.
Scalable: The single-column stacker crane can be
equipped with two sets of dual-deep telescopic forks.
High-Speed: Maximum speed up to 240 m/min.
Breakthrough Function: Dual-station access meets
the requirements of high-throughput inbound and
outbound operations.
Anti-Sway: Advanced structural design and intelligent
control minimize column sway, ensuring fast, safe and
stable operation.
Typical projects：
Heights 50 m (MAX)
Payload 2,600 kg (MAX)
Travel acceleration (max) 0.8 m/s2
Travel speed (max) 240 m/min
Lift acceleration (max) 1 m/s2
Lift speed (max) 120 m/min
Inspired and Innovative
Client Location Height(m) Payload(kg)
Duratex Poland 18 12,000
Falco Italy 10 10,000
Hansen
Drives Ltd. Italy 17 11,000
Mondi India 33 4,500
CSSC SWS China Shanghai 11 6,000
Helukabel Germany 23 4,000
IVC Group USA 10 8,800
Mankiewicz Germany 11 4,000
FAW-Hongqi China Changchun 11 12,000
MING TAI China Zhengzhou
24 20,000
28.5 30,000
ZMI China Zhoushan 10 8,000
SUNHO China Shangqiu 23.8 18,000
Nanshan
Aluminum China Yantai 30.4 30,000
Weili China Yinchuan 14 11,000
Ultra-High Stacker Crane—RBG Heavy-Duty Stacker Crane—HD
DESIGNED FOR SPECIAL CHALLENGES.
Heavy and super-heavy loads represent a particular
challenge for stacker cranes in terms of materials and
design. MIAS heavy-duty stacker cranes have been
designed specifically for this purpose.
As well as offering the essential static and dynamic
stability, our stacker cranes are designed to meet the
industry’s special requirements, such as in the steel
industry or the timber trade, for example. Heavyduty stacker cranes are designed to be robust and
operationally reliable for use in the toughest conditions.
> Control from cabin:complete operation from the cab
on the lifting frame is possible at any time.
> Optimal surface pressure: impellers with a diameter of
1000mm optimize the surface pressure.
> Vibrations minimized:large rails and wide rail head.
> Perfect interaction: two lifting drives on each side with
up to 30m/min and acceleration of 0.2m/ s2 lift the load
quickly and safely.
Typical projects：
Heights 35 m (MAX)
Payload 50,000 kg (MAX)
Travel acceleration (max) 0.3 m/s2
Travel speed (max) 210 m/min
Lift acceleration (max) 0.2 m/s2
Lift speed (max) 30 m/min
30
Stacker cranes AS/RS
Client Location Height(m) Payload(kg)
Audi China Changchun 16 1,000
BMW China Shenyang 23 1,100
Daimler China Beijing 27 1,200
FAW-VW
China Changchun 14 1,050
China Tianjin 18 1,050
China Qingdao 18 1,050
China Chengdu 18 1,000
China Foshan 18 1,000
FAW-Hongqi China Changchun 21 1,200
FAW
China Changchun 21 1,050
China Qingdao 15 900
Tesla China Shanghai 17 1,000
JMC China Nanchang 20 1,000
Chery China Anqing 20 1,000
SPOTLIGHT China Suzhou 19 1,000
XPeng Motors China Guangzhou 18 1,000
Li Auto China Beijing 18 1,000
Shanghai Port China Shanghai 30 3,000
Square China Nantong 34 2,230
Ming Peng China Suzhou 32 3,000
Large-size Double Mast Stacker Crane
The MIAS double - mast stacker crane is custom
- designed and developed for various cargo size
specifications. In particular, the automotive body has
extremely high requirements for equipment stability,
and MIAS has rich experience in serving automobile
factories.
We apply our non - standard design experience to
material handling scenarios in various industries,
such as for long - and - large - items, vehicle - storage,
and so on.
> Efficient and reliable transport of unprocessed or
painted vehicle bodies
> Operationally reliable: availability > 99%
> Tried and tested: MIAS vehicle body stacker cranes are
in use worldwide
Typical projects：
Heights 40 m (MAX)
Payload 5,000 kg (MAX)
Travel acceleration (max) 0.8 m/s2
Travel speed (max) 240 m/min
Lift acceleration (max) 1 m/s2
Lift speed (max) 90 m/min
Inspired and Innovative
YOUR PARTNER FOR EFFICIENT STORAGE TECHNOLOGY IN THE AUTOMOTIVE INDUSTRY
The automotive industry is characterized by tight schedules and production processes that are part of a global network.
As storage space is limited, precise control of deliveries is absolutely essential. Whether it’s the conveyor leading to final
assembly or transfer via a decoupling module that you are looking for, MIAS is your reliable partner for efficient storage
technology.
Pressing Line Body Shop Paint Shop Engine Line Assembly Line Sequencer
Products AS/RS for Pallets
AS/RS for Heavy Duty
AS/RS for Car
Bodies
AS/RS for Car
Bodies AS/RS for Pallets AS/RS for Miniload
AS/RS for Pallets
AS/RS for Miniload
AS/RS for Palletts
AS/RS for Car Bodies
Clients
BMW
Porsche
VW
FAW-Hongqi
Audi
BMW
Daimler
VW
JMC
FAW-Hongqi
Audi
BMW
Daimler
Seat
VW
Audi
BMW
Seat
Daimler
Porsche
Shanghai GM
Audi
BMW
Daimler
Seat
VW
32
Stacker cranes AS/RS
Elevator Transfer Vehicle—ETV
Transfer Vehicle—TV
ETV is generally used for the transfer, storage, and
retrieval of unit load equipment in roller - type
racks. It can move in both the vertical and horizontal
directions simultaneously and reach the designated
position quickly.
It is widely used in airport logistics and can transfer
all the unit load devices (ULDs) specified in the IATA
ULD Technical Manual.
The TV runs between the shelves in the transfer/
storage system area of the unit load equipment, and
is used for the transfer, storage, and retrieval of the
loads on the landside, airside, and unit load racks.
It is widely used in airport logistics and can transfer
all unit load devices (ULDs) specified in the IATA ULD
Technical Manual.
Heights 30 m
Payload 13,600 kg
Travel acceleration 0.3 m/s2
Travel speed 120 m/min
Lift acceleration 0.3 m/s2
Lift speed 30 m/min
Payload 13,600 kg
Travel acceleration 0.3 m/s2
Travel speed 120 m/min
Inspired and Innovative
Heights 60 m
Payload 13,600 kg
Lift acceleration 0.3 m/s2
Lift speed 30 m/min
Lifter
It consists of a metal frame, a cargo platform, a
counterweight, tracks, a lifting drive system, and a roller
conveyor system, performing the lifting and horizontal
transportation of goods.
The lifter adopts a welded steel structure. When facing
heavy - duty cargo loads, it can resist bending moments
and torques. It is also equipped with safety protection
devices such as overload protection and anti - fall
protection, so as to ensure the safe delivery of goods.
> The structure has good rigidity and small deformation.
> Unique protection device to ensure the safety of goods
during loading and unloading and avoid the risk of
falling.
> Low running noise.
34
Stacker Cranes for Cleanroom Environments
(Class 1000 Cleanroom)
Class 1000 Cleanroom
In the chip and semiconductor industry, automated
stereoscopic warehouses and internal material
handling are involved. For such environments,
equipment should avoid generating metal dust and
other contaminants during operation. MIAS has
practical cases of clean-type telescopic forks and
stacker cranes applied in the semiconductor field,
and we can provide stacker cranes that meet the Class
1000 cleanliness requirement.
Client Cleanliness Class Location Height(m) Payload(kg)
TCL
CSOT
Class 10000 China Suzhou 4.25 200
Class 10000 China Suzhou 3.2 90
Class 10000 China Suzhou 3.55 90
Class 1000 China Wuhan 3.3 60
Class 1000 China Wuhan 3.19 160
Typical projects：
Stacker cranes AS/RS
Inspired and Innovative
Stacker Cranes for Cleanroom Environments
(Class 1000 Cleanroom) 4-Wheel Stacker Crane Without Top Guiding
SAVE STORAGE SPACE FOR YOU.
In some old factory renovation projects, or some
projects because of storage space problems, can not
use the top rail, MIAS can provide double ground rail
stacker, used to achieve automatic three-dimensional
warehouse storage of goods.
> Without top guiding,compact overall structure, small
space occupation
> The structure has good rigidity and small deformation
> Four-wheel structure, stable operation, the ground
bears little weight per unit area
> Low operating noise
Standard Heights Custom-made
Payload 1,200 kg (MAX)
Acceleration unloaded(max) 0.5 m/s2
Speed unloaded(max) 180 m/min
Typical projects：
Client Location Height(m) Payload(kg)
Tesla China Shanghai 4.9 900
Tesla Germany 4.85 900
Tesla China Shanghai 5.5 1,000
FAW-VW China Foshan 5.0 700
FAW-VW China Foshan 6.95 780
36
Number of stacker cranes pcs
Height of stacker cranes m
Width of roadway mm
Length of roadway m
Minimum height m
Maximum height m
Load type
Length of load mm
Width of load mm
Height of load mm
Weight of load kg
Number of compound cycles per hour Dc/h
Number of cycles per hour Sc/h
working condition of calculation
Travel speed m/min
Lift speed m/min
Travel acceleration m/s2
Lift acceleration m/s2
Speed payloaded(Fork) m/min
Speed unloaded(Fork) m/min
Acceleration payloaded(Fork) m/s2
Acceleration unloaded(Fork) m/s2
Single-deep Gripper
Double-deep（single motor） Shuttle
Double-deep（double motor） ...
Stacker cranes inquiry demand data
Please provide us with the following necessary datas and we will provide you with the appropriate technical solution.
Please take photos or scan the following data and send it to our email: sales@mias-group.com.cn. We will provide
professional services for you.
Design, manufacture, drive, roadway equipment, shipping, assembly, installation, equipment documentation.
Encoder, switch, control, wiring, WMS, power box, Frequency converter, performance test, upper guide, auxiliary on-line guide.
Project： Location： Installation time：
Basic Data
Payload Data
Calculate (Based on FEM 9.851）
Scope of supply
Out of scope
Other requirements
Dynamic Data
Telescopic Fork
Stacker cranes AS/RS
Inspired and Innovative
維護服務
Retrofit Services
Maintenance service online 38
Repair of Load Handling Devices 39
Repair of Stacker Cranes – AS/RS 39
Spare parts 39
MIAS comes up with innovative solutions in retrofit
projects, to make your system high-performing, efficient,
future-proof and highly available once more.
Retrofit Services
Targeted measures to ensure efficiency and
future-proof your business.
38
Retrofit Services
When you have some trouble about your telescopic forks or stacker cranes, fast and professional services you will get
through your smartphone with just three steps as below :
After following Mias' wechat
account, click the menu bar
in the lower right corner:
'Contact us' -' Fault Repair '，
After the service work
order is submitted,
you can click the icon
\"View progress\" in the
lower right corner of the
second step to track the
work order in real time.
Click on the 'Submit Service'
icon,
Fill in the information as
prompted and submit.
Just 3 steps, quick repair !
Service Hotline : 400-838-5866
Maintenance service online
1
1
1 Equipment nameplate number or stamp number, e.g. '18-1234'
2 Describe a field fault , such as' motor damage '
3 Live pictures or short video
4 Company name
5 Contact name
6 Contact phone number
7 The address
2
3
4
5
6
7
2 3
Inspired and Innovative
You can't afford equipment downtime. So why take the
chance that a part you choose could negatively impact the
performance of your equipment?
> MIAS can tailor a Recommended Spare Parts (RSP)
package so that you will always have parts necessary for
common repairs on hand
> MIAS provides genuine OEM parts to maximize
performance, operation life, and cost effectiveness
> Each and every part in MIAS equipment is chosen based on the highest quality standards to ensure that your equipment
functions at its best
> Parts for non-MIAS systems
Is your MIAS load handling attachment showing its age?
Replacement isn’t the only way. With expert repair and
reconditioning, many load handling attachments can be
made fit for many years to come. This is how we do it:
① Actual wear analysis of the unit;
② Report compilation;
③ Cost estimate for repair work;
④ Replacement of all wearing parts and faulty components
such as guide rollers, guide rails, leaf chains, drive chains,
gear components, chain adjusters, path measuring systems,
bear-ings;
⑤ Test to ensure the reconditioned system is state of the art;
⑥ 12-month warranty for factory repairs;
⑦ For several load handling attachments, old parts can be swapped
for good ones (an addi-tional load handling attachment is required).
Is your storage system showing its age? As an expert in
stacker cranes, with targeted modernization we can optimize
existing systems at low cost regardless of the manufacturer,
and make them fit for the future.
Refitting is carried out in the shortest possible time, ensuring
you a smooth transition without significant downtime.
What’s more, you will once again be able to obtain spare
parts for your system.
> Fixed price for peace of mind
> Allows you to plan ahead
> Higher availability and longer service life
> Saves resources
> Retrofit by experts: As a manufacturer of stacker cranes and load handling devices, we are familiar with your equipment
down to the smallest detail
> Upgrade older equipment to the current state of the art, thereby optimizing throughput
> Ensure availability of spare parts for many more years
> Minimal downtime during retrofit measures
> Highest quality standards: We manufacture nearly all the components used in our products ourselves, all other parts are
sourced from well-known brand manufacturers
Repair of Load Handling Attachment
Repair of Stacker Cranes – AS/RS
Spare Parts
MIAS Wechat
Note: The specific parameters involved in this catalog will
be adjusted according to the actual working conditions.
www.mias-group.com
MIAS MATERIALS HANDLING (KUNSHAN) CO.,LTD.
No.359,Hengguanjing Road,Zhangpu Town Kunshan,Jiangsu 215321,P.R. of China
Sales Number：+86(512) 57293100-863/869
Sales Email：sales@mias-group.com.cn
Service Hotline：400-838-5866
Service Email：service@mias-group.com.cn
Postcode：215321
